bandage and I have been spending a considerable amount of time lately working on bondage gear, made from clear acrylic rods and illuminated at the ends by LEDs.
Most recently, we’ve been working on a spreader bar, which I have finally finished putting together. This is just a prototype; I want to figure out a prettier way to mount the restraints, and a more attractive end cap to house the batteries and LED lights.
There is a set of LEDs in each end. The LEDs that light it up flash in a pattern of different colors, red, green, and blue, and the colors keep cycling continuously. A static image can’t really convey how it looks, but the effect is something like this:
Here’s one of the endcaps removed, with the electronics inside:
It’s not quite perfect yet, but I think it’s pretty damn cool. Now I just have to tie bandage‘s legs apart with it and molest her at the next S&M party.
Very Lumpy!!!!!!!
Very Lumpy!!!!!!!
Lovely!
It looks like you used thick enough rod that breaking shouldn’t be a problem under normal usage. How are the metal bits affixed to the rod?
The metal parts are parts from a latch for a chain-link fence. Each one is two parts, one part goes on each side of the rod and they’re bolted together like so:
The restraint point is a snap hook held by one of the bolts that holds the two parts together.
Lovely!
It looks like you used thick enough rod that breaking shouldn’t be a problem under normal usage. How are the metal bits affixed to the rod?
Very nice indeed!
While I’m here, would you mind if I added you to my list of journals I read regularly?
JanetM, from ssbb
Not at all! 🙂
Very nice indeed!
While I’m here, would you mind if I added you to my list of journals I read regularly?
JanetM, from ssbb
The metal parts are parts from a latch for a chain-link fence. Each one is two parts, one part goes on each side of the rod and they’re bolted together like so:
The restraint point is a snap hook held by one of the bolts that holds the two parts together.
Not at all! 🙂